HondaCivicForum.com
mudflapledV 2
mudflapledV 2
16 2008/07/30 19:05:09
KONIGC 27
KONIGC 27
9 2008/07/30 19:02:51
ledsdone013
ledsdone013
4 2008/07/30 19:05:09
WHEN I BOUGHT THE CAR...
WHEN I BOUGHT THE CAR...
3 2009/01/31 15:40:14
begining, seems like along time ago!
begining, seems like along time ago!
3 2008/07/30 19:00:38
only need to slightly tweek the passenger fender for a perfect hood gap. still havent done it yet but will do before i paint. its close enough for now. all it needs is to simply open up the fender bolt holes to space it over in the front alittle more.... the worst hit was on the passenger side so thats why its not perfect bolt in fitment.
only need to slightly tweek the passenger fender for a perfect hood gap. still havent done it yet but will do before i paint. its close enough for now. all it needs is to simply open up the fender bolt holes to space it over in the front alittle more.... the worst hit was on the passenger side so thats why its not perfect bolt in fitment.
2 2009/01/31 15:53:57
stock cleaned up
stock cleaned up
2 2009/01/31 14:42:29
1/0gauge wire
1/0gauge wire
0 2009/05/21 16:29:41
new 1/0gauge wire for my amplifier. ordered 27ft. thats 10ft left over after ran from front battery to behind the rear bench seat where my amplifier will be. the rest will be used for ground wire and to link the front 2 batteries power together.
new 1/0gauge wire for my amplifier. ordered 27ft. thats 10ft left over after ran from front battery to behind the rear bench seat where my amplifier will be. the rest will be used for ground wire and to link the front 2 batteries power together.
0 2009/05/21 16:27:51
truck lowered 4/6 5-21-09
truck lowered 4/6 5-21-09
0 2009/05/21 16:27:51
truck lowered 4/6 5-21-09
truck lowered 4/6 5-21-09
0 2009/05/21 16:27:51
truck lowered 4/6 5-21-09
truck lowered 4/6 5-21-09
0 2009/05/21 16:26:14
truck lowered 4/6 5-21-09
truck lowered 4/6 5-21-09
0 2009/05/21 16:26:14
truck lowered 4/6 5-21-09
truck lowered 4/6 5-21-09
0 2009/05/21 16:26:14
body lines are mostly golden.
body lines are mostly golden.
0 2009/01/31 15:53:57
FINALLY got the whole front end on the car. tho still needs paint. spring 09 ill paint the car...
FINALLY got the whole front end on the car. tho still needs paint. spring 09 ill paint the car...
0 2009/01/31 15:53:57
the new support welded in and welds painted also. looks brand new ;)
the new support welded in and welds painted also. looks brand new ;)
0 2009/01/31 15:49:54
YES i drove it like this for about a week or two.LOL HEY IT WAS LEGAL... the steel bumper and the impact foam was there along with all lights so it was legal. trust me i asked a local cop before driving it on the road.LOL i just wanted to test the car out even more before i bought the rest of the body panels. and it was all good. tho i did get some funny looks driving around town. LMFAO
YES i drove it like this for about a week or two.LOL HEY IT WAS LEGAL... the steel bumper and the impact foam was there along with all lights so it was legal. trust me i asked a local cop before driving it on the road.LOL i just wanted to test the car out even more before i bought the rest of the body panels. and it was all good. tho i did get some funny looks driving around town. LMFAO
0 2009/01/31 15:49:54
DEEP CLEANING..... SIMPLE GREEN degreaser FTW!!!!! it was horible before i degreased the engine bay!
DEEP CLEANING..... SIMPLE GREEN degreaser FTW!!!!! it was horible before i degreased the engine bay!
0 2009/01/31 15:49:54
front radiator support drilled and chiseled out. ready for the new support to be welded in place.
front radiator support drilled and chiseled out. ready for the new support to be welded in place.
0 2009/01/31 15:44:06
TESTING IT OUT around the yard.LOL just slapped a radiator in it and drove it around the yard for awhile to ensure the motor and tranny where both good before i started fixing anything else.
TESTING IT OUT around the yard.LOL just slapped a radiator in it and drove it around the yard for awhile to ensure the motor and tranny where both good before i started fixing anything else.
0 2009/01/31 15:44:06
First mod i did. LMFAO hood latch crushed so i flipped it fowards to remove the damaged parts
First mod i did. LMFAO hood latch crushed so i flipped it fowards to remove the damaged parts
0 2009/01/31 15:44:06
WHEN I BOUGHT THE CAR... ya it came with rice all over it...
WHEN I BOUGHT THE CAR... ya it came with rice all over it...
0 2009/01/31 15:40:14
WHEN I BOUGHT THE CAR...
WHEN I BOUGHT THE CAR...
0 2009/01/31 15:40:14
tweed headliner
tweed headliner
0 2009/01/31 15:37:52
tweed headliner
tweed headliner
0 2009/01/31 15:37:52
my Alpine dvd 6.5inch screen radio.
my Alpine dvd 6.5inch screen radio.
0 2009/01/31 15:37:52
99 front seats.
99 front seats.
0 2009/01/31 15:32:59
6K BIxenon hids
6K BIxenon hids
0 2009/01/31 15:32:59
6K BIxenon HIDS... those are high beams.
6K BIxenon HIDS... those are high beams.
0 2009/01/31 15:32:59
96 to 99-00 center blower duct differences.
96 to 99-00 center blower duct differences.
0 2009/01/31 15:29:01
COMPLETE 99-00 electronic heat blower unit harness and all needed for upgrade as well as the dash center vents.
COMPLETE 99-00 electronic heat blower unit harness and all needed for upgrade as well as the dash center vents.
0 2009/01/31 15:29:01
96 to 99-00 dash consoles
96 to 99-00 dash consoles
0 2009/01/31 15:29:01
96 door panel 23
96 door panel 23
0 2009/01/31 15:26:14
sub behind the stretched carpet.
sub behind the stretched carpet.
0 2009/01/31 14:55:22
seat folded down to access amplifier behind it hidden also. but you can see the carpet pushed in better in this picture. BUT I WILL BE MODIFYING THE BOX IN THE SPRING... i want to add a port to the box. but i must make the port external, but i will hide the port behind the seat so the looks wont change but will be louder and sound better for sure. BUT if the ported box does not make my happy then i will go even further custom by cutting down the bench seat and building a mini wall behind the drivers seat. but leave the seat section on the passenger side.
seat folded down to access amplifier behind it hidden also. but you can see the carpet pushed in better in this picture. BUT I WILL BE MODIFYING THE BOX IN THE SPRING... i want to add a port to the box. but i must make the port external, but i will hide the port behind the seat so the looks wont change but will be louder and sound better for sure. BUT if the ported box does not make my happy then i will go even further custom by cutting down the bench seat and building a mini wall behind the drivers seat. but leave the seat section on the passenger side.
0 2009/01/31 14:49:28
box curve
box curve
0 2009/01/31 14:49:28
sub box carpeted and done. and YES im hiding the subs. the front baffle is doubled up to mount the subs flush, and the carpet stretches easy so the slight rubbing of the subs surround on the carpet doesnt effect the output at all. sounds decent and looks very stealth and stock IMO.
sub box carpeted and done. and YES im hiding the subs. the front baffle is doubled up to mount the subs flush, and the carpet stretches easy so the slight rubbing of the subs surround on the carpet doesnt effect the output at all. sounds decent and looks very stealth and stock IMO.
0 2009/01/31 14:49:28
installed and trim panels made to match contour of the stock molding to make it look like its factory.
installed and trim panels made to match contour of the stock molding to make it look like its factory.
0 2009/01/31 14:44:02
almost done with the main box build.
almost done with the main box build.
0 2009/01/31 14:44:02