Mechanical Problems & Technical Chat If you've got a problem you just can't figure out, a noise you can't diagnose, or a check engine light that won't go away, ask about it here!

Need help troubleshooting, '98 Civic

Thread Tools
 
Search this Thread
 
  #11  
Old 05-08-2010, 01:09 PM
NS's Avatar
NS
NS is offline
Junior Member
Thread Starter
Join Date: Jan 2007
Posts: 12
Default

Looks like its no spark. I can smell gas when I pull the plugs, I tried grounding one to the valve cover while I started the car and didn't see any spark. I tried measuring the resistance of the wires but can't get the probe deep enough in to get a measurement.....I would think the probability of all four being bad at the same time is low however.
 
  #12  
Old 05-08-2010, 01:27 PM
RonJ's Avatar
Recognized HCF Member
Join Date: Sep 2007
Location: Houston, Texas
Posts: 9,453
Default

Nice work. P1399 is a multiple misfire code. My guess is a bad coil or ICM or both.

1) Check whether dash fuse #9 is blown.

2) Remove the coil and ICM from inside the distributor. Test the resistance of the coil and have an auto parts store test the ICM.


Name:  picture_3573.jpg
Views: 1407
Size:  68.8 KB

Name:  picture_3486.jpg
Views: 533
Size:  50.8 KB

 
  #13  
Old 05-09-2010, 08:57 PM
NS's Avatar
NS
NS is offline
Junior Member
Thread Starter
Join Date: Jan 2007
Posts: 12
Default

Originally Posted by RonJ
Nice work. P1399 is a multiple misfire code. My guess is a bad coil or ICM or both.

1) Check whether dash fuse #9 is blown.

2) Remove the coil and ICM from inside the distributor. Test the resistance of the coil and have an auto parts store test the ICM.







This is great, thank you. I was reviewing the "check spark" link in your sig, one of the steps was to verify the ground cable between the distributor and the engine block was secure......I didn't see such a cable on my '98. It looks like the distributor is grounded through the bolts......is that correct?
 
  #14  
Old 05-10-2010, 04:54 AM
mk378's Avatar
Recognized HCF Member
Join Date: Jun 2007
Posts: 10,023
Default

Take the cap off. Make sure the rotor is secure (a common problem for the screw to fall out). Hold a grounded test wire near the secondary terminal on the coil and crank.

Weak yellow sparks -- replace coil. Don't trust a resistance test. Resistance test will prove it is bad but not necessarily prove it is good.

No sparks -- Check does the distributor shaft rotate when you crank? (if not, stripped timing belt) Do you have battery voltage on coil terminals A and B to ground both with the key on and while cranking?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Maya Wysocki
Mechanical Problems & Technical Chat
0
04-18-2014 08:29 PM
curt248
Mechanical Problems & Technical Chat
7
10-04-2012 04:20 AM
hulloha
Mechanical Problems & Technical Chat
7
07-15-2010 11:24 AM
martyb555
Suspension, Brakes, Tires & Wheels
4
09-01-2007 07:57 AM
ncomasters
Mechanical Problems & Technical Chat
3
08-04-2007 10:15 AM



Quick Reply: Need help troubleshooting, '98 Civic



All times are GMT -8. The time now is 11:50 PM.