2001 civic no spark pleasehelp
#11
To check if the belt has jumped, it is not necessary to take out the crank bolt, etc. Simply take the upper plastic timing cover off, leave the lower cover in place. You will need to loosen the valve cover and lift it up to get the timing cover off. Rotate the crank counterclockwise, the way it normally turns, to TDC (single mark on the accessory pulley). Examine the marks on the cam pulley. If the "UP" is down, turn the crank exactly one turn counterclockwise back to TDC again.
Last edited by RonJ; 08-26-2008 at 02:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Ryans2kidz
Mechanical Problems & Technical Chat
1
02-12-2013 07:35 AM
stephelton
Mechanical Problems & Technical Chat
4
01-05-2007 11:10 PM
Kenneth Ames
Mechanical Problems & Technical Chat
7
11-07-2006 09:50 PM