LED CLUSTER INSTALL =)
#1
LED CLUSTER INSTALL =)
Remember the infamous cluster cluster install by addictiontobass. https://www.hondacivicforum.com/m_313584/tm.htm
Well I took it upon myself to try this out. I followed addictions DIY but started to stray off on my own. I hotglued the led strips directly onto the gauge face right behind it because it fit much easier then glueing it on the board. The hardest part was the damn gas and temp gauges. Like addiction said I had to slightly bend the metal "resisters"? I think thats what they were. Well bascially after 3 hours of slow but steady and patient work here are the results. They are amazing. All it takes is some time and patience.
Oh and my camera is terrible at night and the leds are in fact soldered onto the board and can be dimmed. Thanks addiction!
Only two pictures that came out semi-nice. You get the idea.
I'll be working on the center console and other areas now. hate the stock green and yellowish tone to it now.
Edit: the pictures shows alot of minor hotspots but thats due to the camera. Verrryy minimal hotspots in person.
Well I took it upon myself to try this out. I followed addictions DIY but started to stray off on my own. I hotglued the led strips directly onto the gauge face right behind it because it fit much easier then glueing it on the board. The hardest part was the damn gas and temp gauges. Like addiction said I had to slightly bend the metal "resisters"? I think thats what they were. Well bascially after 3 hours of slow but steady and patient work here are the results. They are amazing. All it takes is some time and patience.
Oh and my camera is terrible at night and the leds are in fact soldered onto the board and can be dimmed. Thanks addiction!
Only two pictures that came out semi-nice. You get the idea.
I'll be working on the center console and other areas now. hate the stock green and yellowish tone to it now.
Edit: the pictures shows alot of minor hotspots but thats due to the camera. Verrryy minimal hotspots in person.
#4
RE: LED CLUSTER INSTALL =)
what kind of led's did you use?? and where from?my stupid "night glow gauges" -the white faced ones, yea, dont work anymore so when i have time im going to do this. i want the dimming adjustability too...
#6
RE: LED CLUSTER INSTALL =)
nice tho ya should took some pictures of how you did yours.... so you just glued them to the back of the gauge gace?
i didnt do that cause i figured it would glow more even with a few inches between the two..
i didnt do that cause i figured it would glow more even with a few inches between the two..
#7
RE: LED CLUSTER INSTALL =)
Yeah thats what I basically did because the strips had a hard time fitting onto the board itself even though the dremel cleared the way. I'll take more pictures of how I did it later on. I'm going to put more sigle leds in there to get rid of some of the hotspots. other then that it looks awesome!