very neat! dont like the colours to much.. but maybe if you do some more green it will even up a bit.

 

i took my whole dash upper piece out in one piece ....there are some screws that are hard to get right by the firewall but facing the wrong way so u can't fit a screwdriver in there I just dremeled them out of there ...u can either bolt after that or just leave them out.. u can always drill the screw out tooo.. if u paint it in the car its real easy to miss spots because of the curve (seen it on alot of cars looks like crap)

for the pic of the back seat....If u use a heat gun and strong spray adhesive u should be able to get the wrinkles out or take it to a auto repoulster and have him stitch u a new cover if u take him the factory piece and have him do that it shouldn't be that much esp if u install it...trust me it will look 10x better and get u points at shows instead of losing points..

 

on a sidenoti think mobstas interior will look alot b etter all black instead of the green

 

I just spent the past few hours painting the dash. I taped the dashboard up with garbage bags and then covered the seats and everything else. I then prepped and painted the dash. It looks so good!!! I'm not going to lie, lol. It turned out really really good. I did it nice and even and it looks great. Here's some pics:





[IMG]local://upfiles/15560/E38F670F1464471FB45F1D1AF2C0345A.jpg[/IMG]

[IMG]local://upfiles/15560/A786322CB6324EBFB583AEFF57F2ACB8.jpg[/IMG]

[IMG]local://upfiles/15560/D788623E9EC840BFAF1DCB93AF3ABFB1.jpg[/IMG]

 

That looks really good dude. Good job. How did you get your climate control out, I didn't really look around much but is it just a few screws under the dash or something because I was just going to tape mine off.

 

easy to pull off.... after ya pull the drivers lower trim panel off, and then fold the glove box down, then yoiu can get to the 3 screws on the center trim piece with the cig lighter, after pullen that trim panel its just 4bolts and the radio/ac panel comes right out after unplugen some wires on the back of course.... realy easy.

 

Yeah me and my friend were trying to figure out and I guess its just 2 of the screws on the bottom that is like holding the whole mounting bracket in and you just pull the whole thing out and unplug all the wires.

 

na thiers 4 bolts...

sorry i dont have any pictures of them BUT close to.... thiers laid down covered up by my sheets.LOL one in the front and one in the back on both sides.... so 4bolts total....

 

Alright thanks. sry for the thread jack btw lol. I'm going to put led's in my vents while I have them easy to get to, I already have all my panels out.

 

led's ftw! lol