My headlights were starting to get pretty foggy, so i decided to wetsand them with 600 and 2000 grit sandpaper. Afterwards, I dried them and buffed them with some plastic polish. I was very satisfied with the results. Took away most of the fog, but some still remains if you look closely. I dont have any before pictures, but here are the after ones.

 

Wow thats a big picture, but yeah it looks nice and clear.

 

i can see you in the picture haha

 

thanks. i need to do that to my car. just didnt know where to start.Where would i get the plastic polish?

 

Someone told me that if you use tooth paste it will take the fog off of head lights. My dad tried it on his car and it made them perfectly clear

 

It should work since you only have to scratch the surface with something that isnt too rough, then clean it up real good and shine it up and you will end up with a fresh layer of plastic.

 

I used acrylic pen polish for mine, just cuz i had it, but you can use plasic x and the like from autozone, and i bet u will get similar results.

 

Sorry about the bad picture, ill get a better one up this weekend i hope. The new camera takes huge pictures, but really good ones.

 

you can change the size settings in your camera. also quality too.

 

DING DING!!! i was gonna say the same thing, saw it doen before and was amazed at how well it worked