Carbon fiber hood
#4
Keep up the post whoring and I'm going to delete every post for every account your Philippine a** has ever made.
to the OP, there's 4 bolts on the hinges (2 on each); take those off, pull the hood off (it's easiest with a friend), put the CF hood in place (again, a friend helps), and bolt the hinges to the hood using the stock bolts.
to the OP, there's 4 bolts on the hinges (2 on each); take those off, pull the hood off (it's easiest with a friend), put the CF hood in place (again, a friend helps), and bolt the hinges to the hood using the stock bolts.
#5
i bought my vis hood from ebay and it was warped .if i was you i would buy directly from vis or evan better seibon they have better fittment and quality products evan the smaller companies like v-fiber are better quality because there not mass produced like vis also you have to remember no matter who you by from it wont be a perfect oem fit .also vis and many others use a gel-coat clear that will fade faster in the sun.do not use carnauba wax it will absorb into the gel-coat and turn it yellow. use a gel-coat wax designed for boats 3m makes a good one. also i would definitely recommend hood pins just to be safe evan vis will tell you this.after you remove the bolts you mite need to pry it from the hinge with a screwdriver its stuck on there from some factory material .
Last edited by lowlife9; 03-22-2009 at 07:05 PM.
#7
hood's WITH VENTS or screens do they let water in the engine bay/touch the air filter?
http://cgi.ebay.com/ebaymotors/96-97...Q5fAccessories
http://cgi.ebay.com/ebaymotors/96-97...Q5fAccessories