Turbo Install Part 1
#72
RE: Turbo Install Part 1
ORIGINAL: FlipHKD720
man i'm excited to see this things final numbers at the dyno and track
man i'm excited to see this things final numbers at the dyno and track
#76
RE: Turbo Install Part 1
well this past weekend came and went. i pulled my intake manifold because the dsm injectors were not sitting flush, so walter and i pulled the mani and drilled out the injector ports. we broke the intake manifold gasket on friday and i couldnt get a new one until monday. we drilled the ports and the injectors fit nice now. we installed the fuel pump which was a piece of cake. i ran the boost gauge and i took my oil sandwich off to get to the intake manifold. luckily i did this cause i found out my oil pressure gauge line was kinked so i replaced that. i figured out where i am routing my air filter and i ordered a coupler for that today. i put three coats of hi temp black paint on my i/c piping and installed the right side of it. here is what needs to be done still:
Gap spark plugs @ .0030 Wastegate vac line BOV vac line Install injectors Cut oil return line Wrap downpipe and dumptube with exhaust wrap
walter wrapped the downpipe but i didnt like it so i am going to redo it this weekend, sorry walter.
here are some pics that i took this weekend.
installing the fuel pump, had to take out the back seats.
taking out the intake manifold, i had to disconnect the throttle body. i forgot to drain my coolant so i had coolant spill out on me everywhere.
no more intake manifold
just another shot of my turbo from a different angle.
so the plans are me going home this friday and hopefully finishing it up and cranking it over, that is if i dont break anything else. wish me luck.
Gap spark plugs @ .0030 Wastegate vac line BOV vac line Install injectors Cut oil return line Wrap downpipe and dumptube with exhaust wrap
walter wrapped the downpipe but i didnt like it so i am going to redo it this weekend, sorry walter.
here are some pics that i took this weekend.
installing the fuel pump, had to take out the back seats.
taking out the intake manifold, i had to disconnect the throttle body. i forgot to drain my coolant so i had coolant spill out on me everywhere.
no more intake manifold
just another shot of my turbo from a different angle.
so the plans are me going home this friday and hopefully finishing it up and cranking it over, that is if i dont break anything else. wish me luck.