Turbo Install Part 1
#114
RE: Turbo Install Part 1
haha is there ever gonna be Turbo Install Part 2 thread?
and i agree with Tony on the ricefest, i mean is that a windshield decal i see on that car in the corner?! [sm=guilty.gif]
good luck again with everything Tyler, cant wait to see the final result!
and i agree with Tony on the ricefest, i mean is that a windshield decal i see on that car in the corner?! [sm=guilty.gif]
good luck again with everything Tyler, cant wait to see the final result!
#115
RE: Turbo Install Part 1
well it turns out im only running on 3 cylindars. i checked the spark plugs to see if they were getting gas and the #2 cylindar is not getting any so i am going to check the injectors and the wiring this coming up weekend. i hope to get it fixed and into paint by monday.
#117
RE: Turbo Install Part 1
Tyler knows that I was just kidding with my "ricer" comment.
Tyler, that sucks man, Welcome to boost! I know this situation all too well. You'll get it figured out soon. Just go through and make sure none of the wires popped loose when you were moving them around the bay. I soldered the **** out of all of them, the wiring should be fine.
Tyler, that sucks man, Welcome to boost! I know this situation all too well. You'll get it figured out soon. Just go through and make sure none of the wires popped loose when you were moving them around the bay. I soldered the **** out of all of them, the wiring should be fine.
#119
RE: Turbo Install Part 1
well i threw tony's injector in yesterday and it sounds 100 times better. its now running on 4 cylindars and i got my oil press gauge working now as well. i was reading 44 psi when i was at idle, then about 60 mph its at 86-90 psi. are these numbers good? the car will be going into paint next week then a tune to follow after it gets out.