GReddy_Civic's Turbo Project
#82
Here's yesterdays pictures
(Thanks Shannon and his dad!)
Took me 30 some minutes to get that out
JB Welded as an extra precaution
Y7 oil pan in
Motor mount=seriously fuxxored
not pretty but hope it works
Teaser...maybe
(Thanks Shannon and his dad!)
Took me 30 some minutes to get that out
JB Welded as an extra precaution
Y7 oil pan in
Motor mount=seriously fuxxored
not pretty but hope it works
Teaser...maybe
#85
actually just over a year exactly, but once i had the parts together it took 3 days
Trent you get the vac mani figured out?
pics look awesome, lots of good work dude!
Last edited by FlipHKD720; 08-07-2008 at 08:15 AM.
#88
Hahaha, i have a vice, its just not fastened to anything. So I finished putting the fenders and plastic stuff back on, attached the oil pressure line to the sandwhich plate, and this means that upon grounding the wires and hooking them up to a power source, adding oil, coolant, spark plugs and wires and switchin ecu's, I should be done. Need to figure out how to attach the A11 wire for the boost control solenoid.
#90
Well it started! Had 2 oil leaks, fixed those. Now the bad parts. The oil pressure is reading 80lbs (no idea why), I'm still not sure the bov and boost controller are wired correctly, and I see lots of black smoke when I rev the engine a little bit.