How do you install a fuel pressure regulator?
#1
How do you install a fuel pressure regulator?
I bought a JDM Fuel Pressure Regulator for my 2000 Civic Ex D16Y8. I was wondering if anyone can give me complete step-by-step directions on how to install this?
#2
RE: How do you install a fuel pressure regulator?
It's a fairly simple affair, but to be safe, go get a Hayne's or other shop manual of your choice. Otherwise... relieve the fuel pressure and it's like two hex bolts and a little hose. Good luck.
#3
RE: How do you install a fuel pressure regulator?
The only tip I have is to sell that "jdm" fuel pressure regulator. If you really want an FPR spend the money for a nice one, or you'll end up regretting it down the road
#7
RE: How do you install a fuel pressure regulator?
For installation:
Relieve Fuel Pressure- Unscrew gas cap
Detatch Negative Battery Terminal- On battery lol
Take off the fuel hose and the vacuum hose from the FPR
Unscrew Mounting Bolts
Remove Regulator
Install New Regulator- Installation is reverse of removal
Use a new O-ring- Make sure to put a light coat of CLEAN oil on the ring [sm=yeahsmile.gif]
Check for fuel leaks!!!
STRAIGHT OUT OF HAYNES ***** FUGGA!!
Relieve Fuel Pressure- Unscrew gas cap
Detatch Negative Battery Terminal- On battery lol
Take off the fuel hose and the vacuum hose from the FPR
Unscrew Mounting Bolts
Remove Regulator
Install New Regulator- Installation is reverse of removal
Use a new O-ring- Make sure to put a light coat of CLEAN oil on the ring [sm=yeahsmile.gif]
Check for fuel leaks!!!
STRAIGHT OUT OF HAYNES ***** FUGGA!!