What size wire?
#1
What size wire?
I am rewiring my amp because the previous owner did a **** poor job. I was wondering if a 10 guage power wire would be enough to supply my subs? They are 1200watt Alpine with a Rockford Fosgate p4004 amp. Thanks
#6
RE: What size wire?
No I dont have legacy subs. The box is legacy but the subs were replaced with Alpine 12". Butanyway I already hooked it up with 1awg and it still doesnt work. I replaced all the wiring and bought new remote wire and ground wire. I hooked everything up and the amp light goes on but no sound??? I dont know if maybe my amp burnt out and its junk or if Im just missing somthing in the wiring.
I have a 12guage wire from the deck to my amp for REM. a 1awg for my power and 1awg for the GND. I have new RCA cables strait from the deck to the amp and 12 guage from the amp to the subs.
I have a 12guage wire from the deck to my amp for REM. a 1awg for my power and 1awg for the GND. I have new RCA cables strait from the deck to the amp and 12 guage from the amp to the subs.
#7
RE: What size wire?
sounds funky to me. Maybe you have to turn the subs on with your deck, if it has that option, for the signal to start flowing, otherwise i dunno.. could be the amp. make sure the gain's on and what not, speakers are all wired correctly in the box, all the general troubleshooting stuff.
#9
RE: What size wire?
some radios have a sub pre-out (RCAs) that needs to be turned. if you still have the manual look it up. if you don't have the manual find in on the internet. if your radio doesn't have that feature, then either the rca terminals or the speaker output terminals are messed up and the only way to get that fixed is if it is still under warranty, then contact rockford